This is a view that has not been seen in these pages before. The new shelf is above the bending brake with the 3 green patches on the edge. As you can see, it is already full of tools and supplies. THe area beneath the new shelf now holds the bending brake. Behind that is the storage spot for the drill packs and spare batteries for the drill and the circular saw. To the right of the brake is a ring of welding rod that holds the container for more rods and aluminum flat stock. Next is the hanger for the heat gun on another bookcase that holds heatshrink, Power Pole connectors etc. Below that are files, rasps etc.Under that is more storage, mainly for stuff I don't know what to do with right now. 

               A new tool has been added to the workshop. As I age I find it harder and harder to make use of a tool that I use very often, a nibbling tool. The hand operated nibbler that I already have just took more effort than one hand could provide. I have now upgraded to a power nibbling tool operated by a corded electric drill. I have mounted the entire assemblage on a board so everything will stay aligned and I have tested it. It works very well except that it lacks a table on which to feed the work throught the nibbler head kind of like a router table. My son has volunteered to assist in building such a table when he comes to visit next month so that will add to the usefulness of the new tool. It certainly makes short work of cutting aluminum sheet or angle. Pictures to follow when we get it completed.

N1GY- The simple Approach to Ham Radio

Why You Should Join an Amateur Radio Club

Why it is important for you to Join.

          Why should you join an Amateur Radio Club? I can think of many reasons. First and foremost among them, the opportunity to meet and get to know other ham operators in your community. There are almost one million amateur radio operators in The United States, but within your local community they are probably not on every block. Ham radio is no different than any other hobby, be it model aircraft builders or Civil War re-enactors. We are a minority of the general public, so we band together to assist each other with our hobby, and to socialize with like minded individuals. Particularly for the newcomer, joining a club is almost a necessity, and here is why. 
           When anyone first gets into a hobby, they have questions, lots of questions. Some of the answers can be found in books or on line, but like any hobby, ham radio has a lingo all its own. For the newcomer, the lingo can be very intimidating. Being in a club allows one to absorb some of the language just by hearing it in context. Most hams are only too happy to explain it to someone else as well.
            Where the question of equipment is concerned, the choices are overwhelming. Club members can make sense of the choices and direct the tyro to solutions that make sense for his or her unique situation. People live in different kinds of communities and have different restrictions on what they can put up for antennas. Within the home, the space available for amateur radio might be a whole room, or it might be just a little space on a desk somewhere. Spouses also have different ideas on what and where they will be happy with radios in the house or the car. Since family always must come first, the advice of more experienced operators can be invaluable in getting amateur radio and your own personal zoning board to happily co-exist.
            Inevitably, at some point the new ham operator is going to come up against a problem. It could be equipment related or antenna related or any of dozens of other problems. Trying to work it out alone can be difficult to say the least. If you belong to a club, it is a simple task to ask another member with more experience for help or advice. Down the road, someone will be asking you similar questions and suddenly you realize that you have become the expert that newcomers look to for help.
            Most ham operators have more interests than just amateur radio. They may be expert gardeners or woodworkers or collectors. By joining a club and participating actively in it, you can avail yourself of the friendships and social contacts that the club provides. Who knows, you likely bring a skill or an experience level to the club that others will see as valuable too.
            Another area where belonging to a club brings benefits is in the area of what I call "the big project". If there is a need for a tower to be erected, or some other large job, club members can be counted on to band together to get it done, whether for the club as a group, or for the benefit of an individual member. Just remember to reciprocate on the next "big project" for someone else.
‚Äč            To find an ARRL affiliated club in your area, go to and look up clubs in your area by zip code, section or state. Visit several of them to find one that suits your interests. Then join one or more of them. Also JOIN THE ARRL. The services provided to the members and the publications they put out are a cornerstone of the hobby. You will find the ARRL Handbook (as just one example) on the bookshelf of almost every professional electronics engineer in the world. The ARRL is amateur radio's most important representative to the FCC and to the world. They protect our spectrum from encroachment by vested interests and speak for us to the government. They also do much more, but that would take a whole book to describe. Just a few of the benefits are affordable insurance on your radio equipment, awards, email forwarding, license renewal, technical information, regulatory information and on and on. The cost is only 39 dollars per year and no better bargain is to be had anywhere.73,